Props project

I paused my progress on the high poly sculpt of the female character model to make a couple of new entries in my portfolio using a model created during my time in grad school. For my MFA thesis project I created a sculptural character made of around 50 different props. I dubbed her “the Juggler”, as she’s inspired by all of the working parents out there juggling the responsibilities of work and home and family. I believed that the character would be a perfect way to show that I’m a well-rounded modeler that can sculpt both organic and hard surface models, but I think perhaps I made her too compact and hid too many of the props that I spent so much time modeling.

I’ve been told that my portfolio is lacking in props and hard surface items. I do definitely focus more on organic, and it’s true that my portfolio is somewhat lacking on low poly hard surface, but this character is made up of so many props that I think I just need to feature them more. To accomplish this I am making exploded views of each of the character’s limbs to clearly showcase the numerous props that make them up. I would love to make a bunch of textured, low poly props for my portfolio as well, but since I’ve had a request to show that I can make props and I don’t want to spend too much time away from my progress on the characters I’m working on at the moment, this will just have to do for now.

After many fun computer crashes eating up my work time today, here’s what I’ve got so far:

Juggler Right Leg - Kitchen Props - final render

Juggler Right Leg - Kitchen Props - final render

Juggler Left Leg - Housework and Hobby Props - Work in Progress  I’m still working on getting the lighting right in this image because Modo is acting extremely unstable on my computer right now and crashing every time I go into render mode on this scene. I’m hoping that by hiding some of the more ridiculously high poly props (like the tea ball mesh) I will be able to get the render view working correctly tomorrow.

Juggler Left Leg - Housework and Hobby Props - Work in Progress

I’m still working on getting the lighting right in this image because Modo is acting extremely unstable on my computer right now and crashing every time I go into render mode on this scene. I’m hoping that by hiding some of the more ridiculously high poly props (like the tea ball mesh) I will be able to get the render view working correctly tomorrow.

Daily Art: Texturing in Modo

January 21st:

Okay, today's work can't be summed up in one image, so I'm posting three. The image above is a collage of all of the texture maps that I created today. The color maps are modifications of the diffuse color maps that I created yesterday. I did a little expert Photoshopping using my displacement maps on top of the color maps to create darker areas of grime in the crevices of the sculpture. The black and white images are specular maps that I created from a similar combination of the original color maps and the displacement maps, since the projections will reflect more light than the grimy crevices.

The next image is a Modo render of the posed, textured sculpture:

I'm showing this image next rather than the A-Frame because this is the position in which I textured the Warrior. A-Frame may be the default position for a model, but this is the default position for a sculpture. This is what my imaginary sculptor sculpted; it therefore follows that the woodgrain would contour to this pose rather than an A-Frame one.

Below is a Modo render of the A-Frame textured model:

I must say that I am quite pleased with how he turned out.

The next few days will be quite a bit of rendering.

Daily Art: Three Weeks of Daily Art

I've been working on the most recent pages of my Cut-Up Sketchbook for the past few days while I've been out of town:

Day 98:


Day 97:


Day 96:


Day 95:


Then I spent this past weekend with my niece and nephew helping my sister prepare for my niece's birthday party, so the art on those days is all party and kid-related:

Day 94:

On Sunday I acted as the unofficial photographer of the birthday party. I won't post pictures of the kids online, but I will show a snippet of an action shot of the piñata smash:


Day 93:

Saturday was cupcake decorating day:

The crab was following a design that my sister found (on Pinterest, I'm sure...)


Day 92:

On Friday I drew some pictures of "Frozen" characters for my niece and nephew that they chose to fold into fans. My nephew wanted Olaf and Sven, which he then colored before adding drawings of his own of Anna and Cristophe:

And my niece wanted Elsa, which I colored for her:


Day 91:

And before that was more Cut-Up Sketchbook:


Day 90:


Day 89:

On day 89 I spent the better part of my work time taking screen shots, editing, and compositing progress photos for this blog. I think this qualifies as Daily Art considering the amount of time that I spent working in Photoshop, but it does not yield its own images. You'll just have to look at days 76-88 to see the results of day 89's work...


Day 88:

A tree:

In the form of a photo collage.


Day 87:

I made a list of all of the remaining tasks to complete in the revision of my Juggler's textures this day.

And then I decorated it:


Day 86:

The 86th day of Daily Art was a Saturday on which I spent 5 hours face painting. Here's a sample of my work:


Day 85:

I also face painted on Friday:


And made a quick sign advertising the face painting:


Day 84:

On this Thursday and the two days before I spent time creating a 10 second long demo reel for my former school's Spring Show. As a student who was enrolled in the fall I still qualify for entrance into this year's show despite the fact that I've already graduated. This is the reel that I submitted:


Day 83:

I submitted that reel because I realized that the submission guidelines prohibited having any contact information anywhere other than the first frame of the 10 second time span (I edited out that frame for posting on the internet). This is the reel that I created the first time around (and the way that I would have left it had I had free reign).


Day 82:

This was the day that I began the reel-editing process.

And the day that I discovered that the resolution requirements were full 1920 x 1080 HD and that I had to re-render a couple of my turntables.

(such as the Juggler wireframe turntable that includes the image above.)


Day 81:

I spent this day trying to turn detail that I'd previously achieved through a normal map into detail achieved through a displacement map.

It worked in general, but lacked much of the sharp definition provided by the normal maps...


Day 80:

Daily Art day #80 was filled with technical behind-the-scenes stuff that provides no great imagery, like transferring sculpting from one object to another to utilize the UVs of the new item rather than the original one...


Day 79:

On this day I concocted some designs for face painting:


Day 78:

I reorganized my Juggler's UVs this day so that each individual piece of her won't require its own unique map when I texture paint her. I probably ended up averaging 3 - 5 items per map instead:


Day 77:

On this day I finished UVing every single piece on my Juggler so that I could really texture paint her rather than relying on procedurals as I did previously:

And, before that, I built a new mesh for the tire in my Juggler's shoulder:

It has far fewer polygons than the tire with the modeled tread, but I think that I should be able to create the same look of a tread by creating a displacement map with the tread pattern in it.


Day 76:

And, finally, on the first/last day (depending on how you look at it) of Daily Art for this entry, I created a new, solid mesh to replace the very high-poly wire mesh in my Juggler's tea ball.

Then I created and tested displacement and transparency maps to use on the new mesh to make it look like it's built from the same wires as the original mesh:


That's all folks!

Daily Art # 19

Day 48:

I've textured my Gecko in Modo.

I altered his color maps just a bit, tweaking levels and saturation for individual diffuse and specular color maps, and I also created maps for specular amount from a combination of the color and normal maps. I put them on a metal-like material that I made in Modo and the above images are the result.

Next step: rendering a color turntable. 

Fall Directed Study - Weeks 12 & 13

My final thesis video presented at my final review on Nov. 27, 2013.

Well, I'm posting my thesis progress from week 12 a bit late, and week 13 a bit early, but this is as good as it gets right now. I'm currently on vacation visiting my family for Thanksgiving, so I don't have much time to write an extensive blog post (or two). First, the news:

I passed my final review!!!

I presented my thesis to four reviewers and they all said that they were impressed, which was really nice to hear. They complimented me on designing a project that has a very good mix of hard surface and organic modeling elements and making it unique. I told them that I was planning to continue the project by texturing the untextured models for my demo reel and they agreed that that was a good idea. They said that the Addict was my best model and the Gecko second to it. They recommended that I go back and paint some more of the Juggler's textures by hand instead of using mainly procedurals, which I agree with emphatically. I've been wanting to do that, as well as adding some more bump and normal map graphics to some of the objects on her, but I knew once I got her to the point that she is at now that I had to stop working on her, call her "good enough" and move on if I was to have any hope of finishing the rest of the project to the standard that I desired. Their strongest criticism was that the Juggler still looks a bit too CG. They also recommended that I update my reel, because the models in what I dubbed "my reel" are all a bit dated, but, since I'm planning to basically use my thesis reel with a few minor tweaks as my demo reel, that's not something that I'm overly concerned about.

Finishing up the last minute changes to my reel and book, revising the book to turn it into a presentation format, and presenting my thesis was the bulk of the work that I completed in week 12. For week 13 I'm taking a break from my "Fearless" project and working on a model for a friend who will be presenting his animation thesis next semester. It's a pretty simple model (an 8-bit style princess), but it's taking a little while to build due to the fact that I'm working on my laptop rather than my PC, which is currently the more powerful of my two computers. My Mac doesn't have a whole lot of space left on it because it's an older computer, so my Maya is running quite a bit slower than I've become accustomed to. I've spent part of the day transferring unnecessary files to my portable hard drive, so I'm hoping that that will give my computer a little more power to speed things up, because it's tedious to select something and wait, and then move something and wait, and then select something else and wait again while trying to model. I'll post some progress pictures next week when I'm a bit closer to being done with her. Then, after she's done, I'll return to texturing my thesis models. I probably won't get very far into texturing before I take another break for the holidays, but I do expect to make at least a little progress since I'll need some kind of work to show for my last week of school.

Fall Directed Study - Week 11

This is my thesis demo reel. It won't be my final reel (I'm allowed to make changes to it up until Tuesday, the day before my review). It was going to be my final reel for a day or two, but both of my instructors had some concerns over the varying line widths in the wireframe gallery renders, and I recently discovered a new way to render wireframes in Modo, so I'm revising the wireframes in which the line widths currently vary. I will also be replacing the high-res Addict model with the low-res, displacement mapped one. 

Here are my new wireframe gallery renders:

And here is my new Addict wireframe turn-around:

This model is just over 20,000 polygons rather than the 325,000 polygons that the higher-res mesh contained.

I am also working on an additional pose for my Addict to show off the texture work that I did in the areas where he has to pull himself apart to unfold:

I'm not too happy with this image yet, but I'm having a hard time deciding how to fix it. His calves are much too wide, his head is too far forward still, and there are a few places where the geometry got tweaked in such a way during the posing that it's pulling on the texture. I can fix the first and last problems pretty easily: for the last problem I just need to make my final adjustments to the geometry with the texture applied, rather than blindly tweaking the low-res mesh alone, and to fix the first problem I just need to re-pose the head and the eyes. The width of the calves is the problem that I'm really wrestling with. They are currently as wide as they are because he was supposed to be built kneeling, which flattens out the calves quite a bit. Since he is supposed to be rigid, I feel like those calves should remain as wide as they are to keep the integrity of the character. However, it looks bad. It looks like I don't understand basic anatomy, and since this is a portfolio piece to show my skill, that's a problem. I think that I'm going to just end up fixing the shape of the calves until it looks better, but I still feel like I'm betraying my concept for the character by doing so...

 Anyway, those are the changes that I expect to make to my presentation in the next couple of days. As far as the work that I did to submit my thesis, however, it all came together pretty easily. I made/modified After Effects compositions for each of my characters and my environment and perfected their individual video segments in their own space, then I put all of the compositions together into a larger composition in which I created the transitions between the turntables and added the concept art frames and informational slates. Then I worked on the book. Well, actually, it wasn't so much "one then the other". I had already started work on the book prior to this past week, but as far as the order in which I pulled all of the pieces together goes, it was the reel first, then the book. It took me until Monday or so to get all of the beauty shot renders done. Then I had to go through them and prepare them for the book by adjusting and merging the layers of render passes and cropping images when necessary. I finished the written portions during render time. Then I just put it all together into a book format as best as I could. Here are a few sample pages:

(I think that I forgot to mention that I re-rendered the inhabited gallery scene to produce the image in the page above. I moved the models around a bit, added some extra lights, and used a wider angle lens for the shot. At first, the shot had the same issue that I was having when rendering my Juggler: disappearing polygons and jagged-edged meshes. Then I finally stumbled upon a solution to the problem online: I had to increase the geometry cache size in the render settings. The time to render this frame dropped from over eight hours the last time around to only three hours with the geometry cache raised. Needless to say: I approved.)

The whole book is 83 pages currently, but will probably expand to 85 by the time I add the revisions. 

Fall Directed Study - Week 10

This post is late because I spent last weekend and the early part of this week bringing all of the elements of my thesis together rather than blog-writing, but it's all done now: my thesis has officially been submitted!!!

I'll go into the details of how I finished it off when I post my week 11 journal entry this weekend, but, for now, here's what I did during week 10: I rendered. That's about it. I mean, I spent some time writing my thesis summary for my presentation book, but mostly I rendered. I rendered beauty shots of models whose turntables were completed, all of the extra frames for that gallery turn-around (which works like a dream now, by the way), and wireframe images for my gallery. Here are a few examples:

I was fairly pleased with these wireframe renders, but both of my instructors expressed concern over the varying line width. I'm currently working on finding a solution to this problem.

I also sought advice on my Addict model this week. I don't recall if I've mentioned this before, but after I made the displacement maps for my Warrior I decided to try generating displacement maps for my Addict so that I could bring down his poly-count. It worked fairly well. He looks good everywhere except for that ridge down his spine which has been problematic ever since I brought the model out of ZBrush. That ridge flattened out quite a bit again, but it doesn't look completely horrible. I couldn't decide whether I should re-render all of his turnarounds with the low-res mesh with displacement or just keep the turntables that I already had. One of my instructors told me to stick with the high-res model while the other told me that if I was really concerned about it I could always keep the high-res textured turnaround and just re-render the wireframe with the lower-poly model. I decided to do the new renders at least, but I haven't fully decided whether to actually make the switch in my project yet. (Even though I already turned in my project I can make revisions up until the day before my review.) I'm really happy about being done, so I'm tempted just to leave it as is for now and wait to make any further revisions until I start texturing the untextured models after I graduate, but I also want to ensure that I've put my best foot forward for my presentation, so we'll see...

Fall Directed Study - Week 9

My Warrior's normal maps and turntable are finished:

The only work that I have left to do with him for my thesis is to render a few beauty shots for my presentation book. Since the renders of his turntable frames took about 30 seconds apiece, however, I don't think that that will be too difficult...

I was really happy that his turntable frames took such a short time to render: it was a nice break from all of the 40+ minute per frame renders that I've had to make time for recently. It was also amusing to be so relieved by 30 second renders one day of this week only to spend the next day setting up and rendering an image that required eight hours and seventeen minutes of render time:

This single image took over eight hours to render because it's got all of my models with all of their maps and textures and multiple subdivision levels filling the entire frame that I sized at full HD resolution: 1920 x 1080 pixels. I'm sure that I could have cut the render time down somewhat by lowering the subD levels on the character models since they take up so little of the frame, but I didn't feel like going through so many objects one by one to see how far I could drop the subD settings when I knew that I was only rendering one frame. If I were making a video of this shot, then I would do it, but for one single render... I just set it to render before I went to bed and by the time that I woke up the next morning it was nearly finished. I'm really happy with this shot. I set the final color render output settings to a gamma between the two frames that I was trying to decide between last week, and I'm pleased with the results: it's got some pretty good contrast, I think, but it still shows off the model well.

Other than that, this week I finished rendering the first 180 essential frames of my gallery scene, but I was unfortunate enough to discover a problem: the view spins too fast. It's just a little dizzying. I'm not quite sure what to do about this, as, even with my newly extended deadline (I have to turn in my thesis one week before I present rather than two), I don't have time to re-render twice the number of frames that I've already rendered for that shot:

I have two methods that I'm currently working on to try to fix this problem: First, I doubled the length of time that it takes to complete the exact turn that I've already rendered all of the frames for in the video above. Then I set Modo to render only the odd numbered frames. In theory, all of the even numbered frames are the exact same frames that I've already rendered since it's the exact same movement over twice the time period, so I won't have to render those again. I just have to render another one hundred and eighty frames set at every other frame between the existing frames. This theory would be sure to work if the movement was steady, but I fear that it might not work because Modo automatically adds an ease-in and -out to its animated motions. You can see it in the graph editor when the change in position over time shows up as something of a wave or S-curve pattern rather than a straight line. For a normal turntable I would get rid of the ease-in and -out in the timing of the movement because I need the model to spin at a constant rate, but in this case I kept it. It's not a full spin, so I thought the eases would be kind of nice. I'm not certain however, if these transitions remain proportional when the length of time that it takes to complete a movement is doubled. If they don't, my every-other-frame renders won't match up to what I already have. I compared the animation graph that showed up for the original movement with the one that I got after extending the time, and they appear to be the same shape, but I'm just not sure: the tiniest difference somewhere in that graph would throw all of the frames after it off. I also rendered the first set of 20 in-between frames last night and put them together with the first 20 frames from the original movement today and it seems to work perfectly. Thus, I'm going to continue rendering the extra frames overnight and testing it out daily to make sure that everything continues to line up. I'm also going to try another option suggested by a classmate tomorrow: time remapping and frame blending effects in After Effects. I watched a tutorial video on a link that he gave me today and it looks pretty simple. I'm afraid that it could bring down the quality of my video, but it might provide a good enough back-up solution if I can't get all of the new frames rendered before I have to turn my thesis in.

I've been working on my presentation documents this past week as well, and, while I'm not as far as I'd like to be with them, I'm not concerned about the amount of time in which I have to complete them. I really want to get all of my beauty and process shots rendered, screen-captured, or composited before I sit down to seriously write out my project synopsis, but I've been spending so much time rendering and editing video over the past couple of weeks that I haven't had much opportunity to render close up beauty shots of my models. The textured character shots seem to take at least an hour (sometimes even two or more) to render, so I'll need a few days in which to complete these. (They take longer than the turntable frames because the model fills a significantly larger percentage of the screen in close-up images than it does when I have to fit the entire model on-screen for a turnaround.)

I began rendering detail shots of my Juggler today, and expect to spend the better part of tomorrow on her as well, since she has so many different details from so many different angles. After that I'll move on to my Addict, which I expect to take a fair portion of a work day to complete. My Gecko renders are finished because I took beauty shots of him when I completed him back in the summer. My Warrior shouldn't require more than a couple of hours for rendering all of his shots, since he renders so quickly compared to everything else. My gallery will probably take at least an hour per frame to render, so I'll probably need up to a day to finish all of the renders that I want of that scene. I should be done with beauty shots by the middle of the week, then I can spend a couple of days writing and laying out the pages of images for my project synopsis. I expect to be finished with that by the coming weekend, and then I can spend the weekend putting all of my turntables (and the new gallery fly-through renders that I'm rendering daily overnight) together into my thesis and demo reel videos. By Monday I'll be able to upload my thesis project to turn it in online, and I'll still have a couple of days to spare. If all goes as planned, then I'm well on my way to being finished!

Fall Directed Study - Week 8

It's official: I have a date for my final review: November 27th. The day before Thanksgiving. This means that I'm either going to have a spectacular or a really bad holiday (hopefully the former). This also means that I have until the 13th of November to finish my thesis and presentation. This isn't the greatest news since I discovered this week that my gallery takes 40-45 minutes per frame to render, but it's also fantastic news given that it provides me with the extra week that I knew I'd need past the earliest possible deadline that I could have had.

The first thing that I worked on this week was my gallery, and thank goodness for that! I started work on it first because I figured that I'd get it out of the way - get it off of my plate while I finished up my Warrior and started work on my presentation materials. Then I discovered how long it took to render a finished frame and I think that I died a little... 

Ok, so that kind of statement may be a bit over-dramatic, but it feels right. I only got my date on Friday, so as far as I knew for most of the week I had the potential for having to turn my entire thesis and presentation in on Monday, November 4th (the day that I'm writing this, as it happens) and there was no way that I could finish everything by then with the renders taking that long. I did the math and discovered that I would need over four straight days and nights of rendering to finish just the essential frames that I needed for my thesis. And I still needed to finish sculpting, normal-mapping, and rendering my Warrior. Not to mention compositing my whole reel and finishing all of my presentation materials - which would require additional beauty shot renders. Thankfully, I have two computers that I can work on (which is how I'm currently rendering gallery frames while typing up this journal entry), but only one has enough RAM to render from Modo in a manageable time-frame (the 45 minute renders on my PC took over 3 hours each on my much older Mac laptop) or handle models with over 10 million polygons in ZBrush. I can work on my presentation materials and directed study journals on my laptop, but the most crucial and time-consuming elements of my thesis all require the same computer to function efficiently, and 4 straight days of rendering did not fit the schedule.

Thus, this past week was incredibly stressful as I waited to find out my date - all the while hoping against hope that I would get a presentation date at least a week later than the earliest one so that I could fit my newly-expanded gallery render time into the schedule. Any time that I haven't been working directly on my PC I've been rendering on it, and I got a pleasant surprise last night when I discovered that the second half of the gallery turntable frames have dropped in render time from 45 to 40 minutes per frame. (That extra 5 minutes makes quite the difference in the long run!)

The first thing that I did in my gallery was finish laying out those newly UVed logs that I mentioned in my last post, then I brought everything into Modo. It was there that I discovered that my couch normal maps looked terrible. I ended up using a slightly higher resolution version of the sculpted couches (one subdivision level up from the lowest level which is pictured in the image above) and re-baking the normal maps to get a much more pleasing result:

I spent a full day adjusting the render settings of the scene to account for odd graininess and scattered light beams and harsh-edged shadows and highlights in the initial images that I was rendering, and I'm pretty happy with where I ended up. The only trouble that I'm having now (aside from astronomical render times) is trying to decide which final color pass I want to use for my turntable:

I really like the contrast of the darker view,

but I worry that the lighter frame might just show off the model better...

I'm waiting for opinions from this week's critique to make my decision fully. I'm rendering both passes with each frame (it doesn't seem to change the render time to have two passes instead of just one) so I have until I finish all of the renders and start compositing my fly-through to make my decision.

In addition to my gallery, I also finished posing and sculpting my Warrior character this week:

I'm quite happy with him. I think that the pose came out really well and I think that the surface texture really looks like it could be chiseled wood. I'm especially happy with the rake-tool details; they're the kind of marks that I noticed all over the real wood sculptures that I was using as reference. Now I'm just hoping that the normal maps that I need to bake in the next day or two capture the detail on him properly.

The last things that I worked on this week were compositing the completed turntable renders of my Juggler and Addict characters. I think that my Juggler still needs some work on the timing, but I'm pretty happy with where my Addict's at. I'll fix my Juggler's issues when I composite my whole thesis reel together this coming weekend, but, for now, enjoy:



Fall Directed Study - Week 4

At the start of my fourth week of directed study I was concerned that my character's body had lost much of the volume that I had sculpted into the high resolution mesh. I had particularly noticed it in the shapes going down the character's back: according to my character design, you're supposed to be able to see those shapes puff out from the back a bit, but the back was nearly a flat curve. I had checked to be sure that the second subdivision level mesh that I exported from ZBrush retained volume in the shoulder area and detail in the face and fingertips, but I hadn't ever had an issue with a character's back, so I didn't think to check it. It was, however, a problem that was bugging me greatly - and one that I couldn't figure out how to fix without having to bake out all new normal maps and re-do all of the texture painting I'd done.

The problem was: I had changed the Uvs after choosing the second subdivision level of the ZBrush model to export as my low-res mesh to apply the normal map (created from the high-res mesh) to; therefore, I couldn't just export a higher resolution model that would hold the sculpted volume better and apply the same texture maps that I had created to it because the UVs wouldn't match up.

Then I had an epiphany: I could project the high-res detail from the ZBrush sculpt onto a subdivided version of the current mesh that I was using that matched the texture maps. Then I would end up with a mesh that had all of the subdivision levels, detail, and volume of the ZBrush sculpt, but with the same UVs that I had been using to build my texture maps. I even discovered that my current normal map functioned just as well when applied to the higher-res mesh as it did whern applied to the low-res one; I didn't have to bake a new one! 

Below is a comparison with some of the most visible differences between the lower-res mesh that I started out working with and the final mesh that I decided to use pointed out:

And the resultant character with the current texture maps that I had produced applied:

 Then I really got down to texture painting, and found out that I had grossly underestimated how long it would take to doodle for this kind of work...

As I mentioned in my last post, I had spent a day painting the texture map that you see on the character above. I had nearly all of the precise linework done. I figured that would be the most time consuming part of the process. I know that one can spend a very long time doodling; I've spent hours filling up a single page with doodles in the past. Key word: "hours", not "days"... Turns out, days is what it takes to doodle textures on a character like this. In fact, it takes the better part of a week working straight through with breaks only for necessities like eating and sleeping. I was blown away. I know that I have a tendency of underestimating how long projects will take me, but this was ridiculous... I had reference. I knew that it took me a day for the precise stuff and that doodling isn't that precise and therefore should require less time. I knew how long I'd spent doodling on paper in the past... I didn't realize that doodling on the computer with my tablet would be as different as it was.

Anyway, here are the results of my week spent texture painting:

Addict Color Map:

Addict Bump Map:

Addict Specular Map:

Addict Material Layer Mask:

(The layer mask is to distiguish the portions of the model that have a raw plaster texture on them rather than a painted plaster surface, as the entire visible portion of the sculpture does.)

The Maps on the Model:

I'm very happy with the way he's turned out, but one of my favorite parts of him is one of the least visible:

Now, you may be wondering why I'm so excited about the bottom of a foot (or, more accurately, since the character's on his knees, the top of a foot). What I'm most excited about, aside from the areas where the raw plaster sections transition into the painted portion of the model (which I think look very realistic, on the pink and orange toes especially), is that this is the first example of any work that I've done in Mudbox. That's right: I finally got around to trying it. I've been telling myself that I'll learn it eventually, whenever I finally work on a project that actually requires it, but I've produced surprisingly few textured models in my time at the Academy. I'm working on a "modeling" degree, not a "texturing" one, so I guess it makes a certain amount of sense, but, still, I'd have liked to have done more texturing in my time here. Anyway, back from my tangent: I had very visible UV seams showing up in this area where each toe meets the main body of the foot: the division line between the white plaster and black painted areas of each digit were uneven at those points. So, I took the model into Mudbox and painted out the seams. I'm very happy with the results. I know it's not an extravagant use of the program, but it's not bad for using a program for the first time with no training, if I do say so myself!

After I finished the texturing I set up turntable lighting, then decided that if he was going to be spinning he should have some kind of base to do it on, so I came up with this:

The Base:

Base Color Map:

Base Bump Map:

Base Specular Map:

The base took a couple of extra hours to make and texture, but I think that it's worth it. It should give my character turntable just a little extra "oomph", as they say. I think that he looks better spinning on a base rather than floating in mid-air. I did one final test render before I began rendering the turntable a few days ago. (And, if you're wondering, yes, it's still rendering at the time that I'm posting this blog entry. I haven't had it rendering straight through, but, regardless, the amount of time that this turntable will have taken to render when it's done will be measured in days, not hours). This is the image that I got:

I have since fixed the faceting on the base by setting it to render at a higher subdivision level. In fact, the image of the base by itself above was my test of the higher subdivision render, and is what it will look like in the final turntable. Once that render finishes, I will move on to rendering the wirframe and flat-shaded versions of this model, then I'll start rendering my Juggler. In the meantime, I'm also going to work on my gallery models in the coming week; I'm really excited about building the fretwork ceiling and the crazy light fixtures. I'll be working during the day and rendering at night - here's hoping that after this month is over my computer and I will both get a break for a little while, because, until then, it's work, work, WORK!